1. Dishes Not Drying

Problem: Dishes come out wet or with water spots.
Solution: Use a liquid rinse aid to help prevent water droplets from forming and leaving spots. Ensure the dishwasher is using the correct drying cycle, and consider running hotter water before starting the cycle.

2. Dishwasher Not Draining

Problem: Water remains in the bottom of the dishwasher after a cycle.
Solution: Check for clogs in the drain filter or hose. If a garbage disposal was recently installed, ensure that the knockout plug has been removed. Clear any debris from the drain filter to allow proper drainage.

3. Dishwasher Leaves Spots or a Film on Glassware

Problem: Glassware appears cloudy or has a white film.
Solution: This is often due to hard water. Use a rinse aid and consider adding a detergent booster like Lemi Shine to soften the water and improve cleaning results.

4. Dishwasher Running Too Long

Problem: Extended wash cycles that exceed normal time frames.
Solution: Ensure hot water is running at the sink before starting the dishwasher, and check that the water heater is set to at least 120°F. Review cycle selections, as some options like sanitize may take longer.

5. Leaky Dishwasher

Problem: Water leaks onto the floor during operation.
Solution: Inspect the door gasket for damage or debris that could prevent proper sealing. Clean or replace the gasket if necessary. Additionally, check the float switch to ensure it’s functioning correctly.

6. Undispensed Soap

Problem: Detergent does not release during the wash cycle.
Solution: Clean out any caked-on detergent from the dispenser and ensure it is not blocked by dishes. Consider switching to liquid detergent if powder consistently fails to dissolve.

7. Poor Cleaning Performance

Problem: Dishes come out dirty or with food residue.
Solution: Check for dirty filters or obstructions in the spray arms that may restrict water flow. Ensure dishes are loaded correctly to allow water and detergent to reach all surfaces.